톱메뉴
메인메뉴
HOME > 제품소개 > Motor Controller > BLDC series
BLxxxx-DIB(800W)
FEATURES
제품특징:
- 2개의 800W급 BLDC 모터 독립제어 가능
- Digital Hall Sensor만을 사용한 BLDC 모터 구동가능
- Analog Hall Sensor 또는 엔코더를 사용한 BLDC모터 구동가능
- Real-Time 위치/속도/전류제어 기능
- 다중모터제어 통신방식(RS232/485/CAN)
- User Programmable Sequence 제어 기능
- 외부입출력 : 6 Analog/Digital I/O port
- 넓은 전원입력 범위
FUNCTION
| CUBE-BL1008-DIB | CUBE-BL2004-DIB | ||
| Number of Motors to Drive | 2 ea | 2 ea | |
| Nominal Supply Voltage | 100V | 200V | |
| Min / Max Supply Voltage | 12V / 400V (additional 8V ~ 30V supply voltage required) | 12V / 400V (additional 8V ~ 30V supply voltage required) | |
| Continuous Coil Current Amplitude(1) at Ta=25℃, 20KHz PWM | 8A | 4A | |
| Maximum Momentary Coil Current Amplitude | 16A | 8A | |
| PWM Frequency | 20KHz | ||
| Control Output and Method | current / speed / position, SVPWM / sine PWM / | ||
| block commutation current control | |||
| Position Sensor |
encoder & Hall IC / Hall IC only / analog Hall IC only / SSl-type absolute encoder |
||
| Back EMF Reducing Resistor | 200W power resistor | ||
| RS232C / RS485 / CAN / EtherCAT | RS232(~115.2Kbps), RS485(~1.25Mbps), CAN(~1Mbps), EtherCAT(option) | ||
| Among RS485 and CAN, only one can be selected by command. | |||
| External I/O | total 6 input or output(some analog and some digital) | ||
| Operating Ambient Temperature | 0℃ ~ 50℃ | ||
| Size (L×W×H, without case) | 120mm x 80mm x 43mm | ||
| Weight (PCB and Bottom Heat Sink) | 244g | ||
| Comment (1) Depends on Additional Heat Sink and Ambient Temperature and PWM frequency. | |||
| Dimensional Drawing & Picture & Connector | |||
|
|||
- 유틸메뉴
